Meet the most trusted custom-made LED light therapy face mask with the first silicone upper lip treatment. FDA and TGA approved, our non-invasive mask use's powerful blue, red, and near-infrared LED technology to target acne, boost collagen, and rejuvenate your skin—all from the comfort of home.
For all skin types and skin conditions.
LED light therapy benefits:
> Promotes healthier, younger-looking skin with red light therapy
> Helps clear breakouts faster with blue light therapy
> 3 clinically proven wavelengths: red (633nm), blue (465nm) and near-infrared (850nm)
How to use
Easy to use and just 3 times per week.
Start with cleansed, dry skin.
Press and hold the controller button to turn on and select treatment mode.
The mask will automatically shut off after the 10 minute session.
Finish by applying your serums and moisturiser for a glowing result
Mode 1: Anti-Acne
Blue (465nm) + Near-infrared (850nm)
132 LEDs
Intensity 30mw/cm2
Mode 2: Acne Repair
Blue (465nm) + Red (850nm)
132 LEDs
Intensity 40mw/cm2
Mode 3: Cell Rejuvenator
Red (633nm) + Near-infrared (850nm)
132 LEDs
Intensity 30mw/cm2
Contraindications
DO NOT use to treat any other conditions apart from those listed in the indications for use. This device has not been tested for any other conditions than those listed, and the risk is unknown.
DO NOT use this device if you are pregnant, planning on becoming pregnant or breastfeeding. This device has NOT been tested on pregnant or breast-feeding women and therefore the risk to the fetus, neonate or pregnant women is unknown.
DO NOT use this device if you suffer from Lupus erythematosus, photosensitive eczema or Albinism. If you use this device system to treat Lupus erythematosus, photosensitive eczema or Albinism you may cause a severe skin reaction.
DO NOT use this device if you suffer from any photosensitive disorder (sensitisation to light). If you use this device and you suffer from a photosensitive disorder you may cause a severe skin reaction.
DO NOT use the device if you suffer from light induced headaches or epilepsy.
DO NOT use the device if you suffer from any genetic conditions of the eye.
DO NOT use this device if you are taking any medication that can cause photosensitivity. If you use this device and you are taking any medication that can cause photosensitivity you may cause a severe skin reaction.
Photosensitivity is a common side effect of various medications. These can include certain antibiotics, chemotherapy drugs, and diuretics. If you are unsure about any medication you may be taking consult your healthcare provider.
Other substances not listed above can also cause photosensitivity. Common examples of these substances are: St John’s Wort, Coal tar, deodorants, antibacterial soaps, artificial sweeteners, naphthalene (mothballs), petroleum products, brightening agents found in laundry detergent, and cadmium sulphide (a chemical injected into the skin during tattooing).
Sensitivity Test
1. Place the device over your inner arm.
2. Turn on the device and allow it to run for its full 10-minute treatment.
3. At any time if your skin feels hot or uncomfortable stop use immediately.
4. Wait at least 24hrs, if the skin appears red and/or itchy the device is unsuitable for you and please contact our Customer Support team and return it within 14 days of purchase.
Meet the most trusted custom-made LED light therapy face mask with the first silicone upper lip treatment. FDA and TGA approved, our non-invasive mask use's powerful blue, red, and near-infrared LED technology to target acne, boost collagen, and rejuvenate your skin—all from the comfort of home.
For all skin types and skin conditions.
LED light therapy benefits:
> Promotes healthier, younger-looking skin with red light therapy
> Helps clear breakouts faster with blue light therapy
> 3 clinically proven wavelengths: red (633nm), blue (465nm) and near-infrared (850nm)
How to use
Easy to use and just 3 times per week.
Start with cleansed, dry skin.
Press and hold the controller button to turn on and select treatment mode.
The mask will automatically shut off after the 10 minute session.
Finish by applying your serums and moisturiser for a glowing result
Mode 1: Anti-Acne
Blue (465nm) + Near-infrared (850nm)
132 LEDs
Intensity 30mw/cm2
Mode 2: Acne Repair
Blue (465nm) + Red (850nm)
132 LEDs
Intensity 40mw/cm2
Mode 3: Cell Rejuvenator
Red (633nm) + Near-infrared (850nm)
132 LEDs
Intensity 30mw/cm2
Contraindications
DO NOT use to treat any other conditions apart from those listed in the indications for use. This device has not been tested for any other conditions than those listed, and the risk is unknown.
DO NOT use this device if you are pregnant, planning on becoming pregnant or breastfeeding. This device has NOT been tested on pregnant or breast-feeding women and therefore the risk to the fetus, neonate or pregnant women is unknown.
DO NOT use this device if you suffer from Lupus erythematosus, photosensitive eczema or Albinism. If you use this device system to treat Lupus erythematosus, photosensitive eczema or Albinism you may cause a severe skin reaction.
DO NOT use this device if you suffer from any photosensitive disorder (sensitisation to light). If you use this device and you suffer from a photosensitive disorder you may cause a severe skin reaction.
DO NOT use the device if you suffer from light induced headaches or epilepsy.
DO NOT use the device if you suffer from any genetic conditions of the eye.
DO NOT use this device if you are taking any medication that can cause photosensitivity. If you use this device and you are taking any medication that can cause photosensitivity you may cause a severe skin reaction.
Photosensitivity is a common side effect of various medications. These can include certain antibiotics, chemotherapy drugs, and diuretics. If you are unsure about any medication you may be taking consult your healthcare provider.
Other substances not listed above can also cause photosensitivity. Common examples of these substances are: St John’s Wort, Coal tar, deodorants, antibacterial soaps, artificial sweeteners, naphthalene (mothballs), petroleum products, brightening agents found in laundry detergent, and cadmium sulphide (a chemical injected into the skin during tattooing).
Sensitivity Test
1. Place the device over your inner arm.
2. Turn on the device and allow it to run for its full 10-minute treatment.
3. At any time if your skin feels hot or uncomfortable stop use immediately.
4. Wait at least 24hrs, if the skin appears red and/or itchy the device is unsuitable for you and please contact our Customer Support team and return it within 14 days of purchase.
